# How to constrain body to be solved as static problem

**URL:** <https://www.simscale.com/forum/t/how-to-constrain-body-to-be-solved-as-static-problem/96075>\
**Category:** Solid Mechanics / FEA\
**Created:** [August 30, 2022, 9:03pm UTC](https://www.simscale.com/forum/t/how-to-constrain-body-to-be-solved-as-static-problem/96075 "2022-08-30T21:03:48Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![anon9613397](https://www.simscale.com/forum/letter_avatar/anon9613397/32/6_449c533f586939b6e5f246632a46421f.png) [@anon9613397](https://www.simscale.com/forum/u/anon9613397)\
**Post date:** [August 30, 2022, 9:03pm UTC](https://www.simscale.com/forum/t/how-to-constrain-body-to-be-solved-as-static-problem/96075/1 "2022-08-30T21:03:48Z")

</div>

hi  
I am trying to model a part that is sliding on a floor that is subjected to force as shown in the image, but usually, I get an error: residual can not be achieved for MUMPS solver. I am using high-density polyethylene, I guess that the problem is that the body is unconstrained or the large displacement of HPDE

 ![image](https://www.simscale.com/forum/uploads/default/original/3X/b/d/bd7ef9155ed661d286dee057e6a6ad2cd1578d9f.png)  
thx  
project link

> **[SimScale Login](https://www.simscale.com/workbench/?pid=1268433391902140066&mi=spec%3Ac2afd838-2626-4702-b473-29c59b010e92%2Cservice%3ASIMULATION%2Cstrategy%3A88)**
>
> Log in to your SimScale account. SimScale makes high-fidelity engineering simulation technically and economically accessible. At any scale. In the cloud.

---

<div class="post-metadata">

**Author:** ![ggiraldof](https://www.simscale.com/forum/user_avatar/www.simscale.com/ggiraldof/32/30298_2.png) [@ggiraldof](https://www.simscale.com/forum/u/ggiraldof)\
**Post date:** [August 30, 2022, 9:39pm UTC](https://www.simscale.com/forum/t/how-to-constrain-body-to-be-solved-as-static-problem/96075/2 "2022-08-30T21:39:22Z")

</div>

Hi, and thanks for using the forum!

The residual error that you mention is related to the mesh quality. If you do not want to refine the mesh much more, then you can increase the “Linear system relative residual” under Numerics, to a bigger value, say of 5e-4.

---

<div class="post-metadata">

**Author:** ![anon9613397](https://www.simscale.com/forum/letter_avatar/anon9613397/32/6_449c533f586939b6e5f246632a46421f.png) [@anon9613397](https://www.simscale.com/forum/u/anon9613397)\
**Post date:** [August 30, 2022, 9:55pm UTC](https://www.simscale.com/forum/t/how-to-constrain-body-to-be-solved-as-static-problem/96075/3 "2022-08-30T21:55:56Z")

</div>

thanks for your reply

I tried to increase the residual and refine the mesh, but I was getting the same issue. I have done a few trials
