# FEA Boundary Conditions for a Multicopter

**URL:** <https://www.simscale.com/forum/t/fea-boundary-conditions-for-a-multicopter/90104>\
**Category:** Project Support\
**Created:** [September 21, 2020, 5:34am UTC](https://www.simscale.com/forum/t/fea-boundary-conditions-for-a-multicopter/90104 "2020-09-21T05:34:44Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![jousefm](https://www.simscale.com/forum/user_avatar/www.simscale.com/jousefm/32/34908_2.png) [@jousefm](https://www.simscale.com/forum/u/jousefm)\
**Post date:** [September 21, 2020, 9:07am UTC](https://www.simscale.com/forum/t/fea-boundary-conditions-for-a-multicopter/90104/2 "2020-09-21T09:07:41Z")

</div>

Hi Shahid!

Maybe this old workshop helps you in setting up boundary conditions for your case? **[Step-by-Step Tutorial: Homework of Session 2- Level 1](https://www.simscale.com/forum/t/step-by-step-tutorial-homework-of-session-2-level-1/387)** - you could even use one arm in the first step as suggested in the step-by-step tutorial.

Hope that helps!

Jousef

---

_[View the full topic](https://www.simscale.com/forum/t/fea-boundary-conditions-for-a-multicopter/90104)._