# External simulation

**URL:** <https://www.simscale.com/forum/t/external-simulation/92862>\
**Category:** Project Support\
**Created:** [May 24, 2021, 12:49pm UTC](https://www.simscale.com/forum/t/external-simulation/92862 "2021-05-24T12:49:23Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![tsite](https://www.simscale.com/forum/user_avatar/www.simscale.com/tsite/32/47909_2.png) [@tsite](https://www.simscale.com/forum/u/tsite)\
**Post date:** [May 24, 2021, 1:00pm UTC](https://www.simscale.com/forum/t/external-simulation/92862/2 "2021-05-24T13:00:44Z")

</div>

Hi there, thank you for using the forum!

I have a few comments.

1. Initially, I noticed that the second simulation finished after 500 loops, and the solution was not converged yet. Maybe you want to consider continuing your run to let the solution converge. [Can I Continue an Existing Simulation Run in SimScale?](https://www.simscale.com/knowledge-base/continue-simulation-run/)

2. Did you make sure to add an inflate boundary layer according to the velocity inlet’s value for both of the cases? [What is y+ (yplus)?](https://www.simscale.com/forum/t/what-is-y-yplus/82394)

Best regards,  
Fillia

---

_[View the full topic](https://www.simscale.com/forum/t/external-simulation/92862)._
