# External simulation

**URL:** <https://www.simscale.com/forum/t/external-simulation/92862>\
**Category:** Project Support\
**Created:** [May 24, 2021, 12:49pm UTC](https://www.simscale.com/forum/t/external-simulation/92862 "2021-05-24T12:49:23Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![ZFR\_08](https://www.simscale.com/forum/letter_avatar/zfr_08/32/6_449c533f586939b6e5f246632a46421f.png) [@ZFR\_08](https://www.simscale.com/forum/u/ZFR_08)\
**Post date:** [May 24, 2021, 12:49pm UTC](https://www.simscale.com/forum/t/external-simulation/92862/1 "2021-05-24T12:49:23Z")

</div>

I am doing a full car simulation of my fsae car. the simulation results came out to be perfect for the first simulation with a velocity of 11.5m/s. But when I did the next simulation by changing only the velocity to 27.7 m/s the results came out to be impractical. Why?

> **[SimScale Login](https://www.simscale.com/workbench/?pid=5347068172919700759&mi=spec%3A87c2fed6-5ef0-4302-8dda-6578f8fca16d%2Cservice%3ASIMULATION%2Cstrategy%3A2)**
>
> Log in to your SimScale account. SimScale makes high-fidelity engineering simulation technically and economically accessible. At any scale. In the cloud.

---

<div class="post-metadata">

**Author:** ![tsite](https://www.simscale.com/forum/user_avatar/www.simscale.com/tsite/32/47909_2.png) [@tsite](https://www.simscale.com/forum/u/tsite)\
**Post date:** [May 24, 2021, 1:00pm UTC](https://www.simscale.com/forum/t/external-simulation/92862/2 "2021-05-24T13:00:44Z")

</div>

Hi there, thank you for using the forum!

I have a few comments.

1. Initially, I noticed that the second simulation finished after 500 loops, and the solution was not converged yet. Maybe you want to consider continuing your run to let the solution converge. [Can I Continue an Existing Simulation Run in SimScale?](https://www.simscale.com/knowledge-base/continue-simulation-run/)

2. Did you make sure to add an inflate boundary layer according to the velocity inlet’s value for both of the cases? [What is y+ (yplus)?](https://www.simscale.com/forum/t/what-is-y-yplus/82394)

Best regards,  
Fillia

---

<div class="post-metadata">

**Author:** ![ZFR\_08](https://www.simscale.com/forum/letter_avatar/zfr_08/32/6_449c533f586939b6e5f246632a46421f.png) [@ZFR\_08](https://www.simscale.com/forum/u/ZFR_08)\
**Post date:** [May 24, 2021, 2:00pm UTC](https://www.simscale.com/forum/t/external-simulation/92862/3 "2021-05-24T14:00:56Z")

</div>

1. You can continue the simulation but the problem is the lift value is positive which is highly impractical comparing with the previous simulation. So even if the simulation converge the value would still be positive.
2. the y+ value I have chosen is 30

---

<div class="post-metadata">

**Author:** ![ZFR\_08](https://www.simscale.com/forum/letter_avatar/zfr_08/32/6_449c533f586939b6e5f246632a46421f.png) [@ZFR\_08](https://www.simscale.com/forum/u/ZFR_08)\
**Post date:** [May 24, 2021, 2:07pm UTC](https://www.simscale.com/forum/t/external-simulation/92862/4 "2021-05-24T14:07:46Z")

</div>

> **[SimScale Login](https://www.simscale.com/workbench/?pid=8197990634517819716&mi=spec%3Af0fa5196-b937-49c0-96db-4c85328d951f%2Cservice%3ASIMULATION%2Cstrategy%3A2)**
>
> Log in to your SimScale account. SimScale makes high-fidelity engineering simulation technically and economically accessible. At any scale. In the cloud.

Here is another situation where I get the same problem even after convergence

---

<div class="post-metadata">

**Author:** ![tsite](https://www.simscale.com/forum/user_avatar/www.simscale.com/tsite/32/47909_2.png) [@tsite](https://www.simscale.com/forum/u/tsite)\
**Post date:** [May 26, 2021, 9:34am UTC](https://www.simscale.com/forum/t/external-simulation/92862/5 "2021-05-26T09:34:53Z")

</div>

The thing is that in order to achieve this y + value, you must create your boundary layer appropriately, as described in the document I sent you.

Make sure you add ‘Turbulence’ under the ‘Field calculations’, so you can check the y+ values after the run is finished too.

> **[How to Control and Analyze Y+ in Meshing and Simulation | SimScale](https://www.simscale.com/knowledge-base/how-to-control-y-when-meshing/)**
>
> How to control, observe, and analyze y+ during the meshing, simulation, and post-processing processes. Learn with SimScale's knowledge base.

---

<div class="post-metadata">

**Author:** ![ZFR\_08](https://www.simscale.com/forum/letter_avatar/zfr_08/32/6_449c533f586939b6e5f246632a46421f.png) [@ZFR\_08](https://www.simscale.com/forum/u/ZFR_08)\
**Post date:** [May 27, 2021, 3:36pm UTC](https://www.simscale.com/forum/t/external-simulation/92862/6 "2021-05-27T15:36:17Z")

</div>

Yes, I have taken the y+ to be 30 and calculated the first cell height from the point-wise website. I am sure there is not a problem with mesh as I re-meshed the mesh with different first cell heights for different velocities. Please take a look at my simulation for any errors.  
I had good convergence for the first simulation but when I change the velocity the results are not practical(ex: drag in negative and lift in positive) and also poor convergence.

---

<div class="post-metadata">

**Author:** ![RicardoParis](https://www.simscale.com/forum/user_avatar/www.simscale.com/ricardoparis/32/30222_2.png) [@RicardoParis](https://www.simscale.com/forum/u/RicardoParis)\
**Post date:** [May 28, 2021, 5:02pm UTC](https://www.simscale.com/forum/t/external-simulation/92862/7 "2021-05-28T17:02:19Z")

</div>

Hi!

I have already seen similar patterns in the results from other FSAE car simulations. Have you already tried activating potential flow initialization?

 ![image](https://www.simscale.com/forum/uploads/default/original/3X/f/a/faddd95304fcddce24e4bfeda1923da49d8d84a9.png)

This usually helps a lot for external aerodynamic cases, by initializing the velocity field based on potential flow.

Cheers
