# External flow simulation mesh stuck at 0%

**URL:** <https://www.simscale.com/forum/t/external-flow-simulation-mesh-stuck-at-0/94708>\
**Category:** Project Support\
**Created:** [December 16, 2021, 4:35pm UTC](https://www.simscale.com/forum/t/external-flow-simulation-mesh-stuck-at-0/94708 "2021-12-16T16:35:32Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![RicardoParis](https://www.simscale.com/forum/user_avatar/www.simscale.com/ricardoparis/32/30222_2.png) [@RicardoParis](https://www.simscale.com/forum/u/RicardoParis)\
**Post date:** [December 17, 2021, 4:54pm UTC](https://www.simscale.com/forum/t/external-flow-simulation-mesh-stuck-at-0/94708/4 "2021-12-17T16:54:01Z")

</div>

Well, your description is a good summary - it depends on the application.

For external aerodynamics, it’s definitely a good idea to keep the [y+](https://www.simscale.com/forum/t/what-is-y-yplus/82394) under control. Surface refinement is interesting to ensure a smooth transition between the boundary layers and the rest of the mesh.

Furthermore, having region refinements for the wake is also a common practice. But of course, this can take some tests. E.g. here is a starting point: [FSAE Tutorial - Preparing Simulations For Success - CAD Preparation](https://www.simscale.com/forum/t/fsae-tutorial-preparing-simulations-for-success-cad-preparation/90562)

Cheers

---

_[View the full topic](https://www.simscale.com/forum/t/external-flow-simulation-mesh-stuck-at-0/94708)._
