# Export SimScale full project to local PC for OpenFoam use

**URL:** <https://www.simscale.com/forum/t/export-simscale-full-project-to-local-pc-for-openfoam-use/92356>\
**Category:** Using SimScale\
**Created:** [April 12, 2021, 5:30pm UTC](https://www.simscale.com/forum/t/export-simscale-full-project-to-local-pc-for-openfoam-use/92356 "2021-04-12T17:30:13Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![shrimpboyho3](https://www.simscale.com/forum/letter_avatar/shrimpboyho3/32/6_449c533f586939b6e5f246632a46421f.png) [@shrimpboyho3](https://www.simscale.com/forum/u/shrimpboyho3)\
**Post date:** [April 12, 2021, 5:30pm UTC](https://www.simscale.com/forum/t/export-simscale-full-project-to-local-pc-for-openfoam-use/92356/1 "2021-04-12T17:30:14Z")

</div>

Hi,

I created a CAD model to use CFD on. Unfortunately, my model is too big and uses too much RAM for SimScale’s cloud computers. This means I am unable to run CFD on my model.

Is there a way for me to download my SimScale model along with all configuration files (marking inlet/outlet ports)? I really need to finish this project!

Thanks!

---

<div class="post-metadata">

**Author:** ![Ricardopg](https://www.simscale.com/forum/user_avatar/www.simscale.com/ricardopg/32/26909_2.png) [@Ricardopg](https://www.simscale.com/forum/u/Ricardopg)\
**Post date:** [April 12, 2021, 6:46pm UTC](https://www.simscale.com/forum/t/export-simscale-full-project-to-local-pc-for-openfoam-use/92356/2 "2021-04-12T18:46:19Z")

</div>

Hi!

You are able to get a version of the set up files by downloading the results of a simulation (see [this article](https://www.simscale.com/docs/post-processing/post-processing-via-3rd-party-solution/) for more details). However, the OpenFOAM version that SimScale uses has quite a lot of custom code.

So if you try to simply run the simulation with the exact same set up, OpenFOAM will definitely complain about multiple variables, dictionaries, etc etc. In short, you’d have to update the entire case to your specific OpenFOAM build.

Cheers

---

<div class="post-metadata">

**Author:** ![shrimpboyho3](https://www.simscale.com/forum/letter_avatar/shrimpboyho3/32/6_449c533f586939b6e5f246632a46421f.png) [@shrimpboyho3](https://www.simscale.com/forum/u/shrimpboyho3)\
**Post date:** [April 13, 2021, 4:16pm UTC](https://www.simscale.com/forum/t/export-simscale-full-project-to-local-pc-for-openfoam-use/92356/3 "2021-04-13T16:16:51Z")

</div>

Hi, like I said before, the simulation cannot even finish running because it runs out of memory. I would therefore not be able to export results.

---

<div class="post-metadata">

**Author:** ![Ricardopg](https://www.simscale.com/forum/user_avatar/www.simscale.com/ricardopg/32/26909_2.png) [@Ricardopg](https://www.simscale.com/forum/u/Ricardopg)\
**Post date:** [April 13, 2021, 4:23pm UTC](https://www.simscale.com/forum/t/export-simscale-full-project-to-local-pc-for-openfoam-use/92356/4 "2021-04-13T16:23:03Z")

</div>

Hi,

Naturally, as you are interested in the case files, and not in the result itself, you should be able to run the case with a very coarse mesh, and a single iteration. That should suffice.

Cheers

---

<div class="post-metadata">

**Author:** ![tm1](https://www.simscale.com/forum/letter_avatar/tm1/32/6_449c533f586939b6e5f246632a46421f.png) [@tm1](https://www.simscale.com/forum/u/tm1)\
**Post date:** [October 25, 2022, 7:38pm UTC](https://www.simscale.com/forum/t/export-simscale-full-project-to-local-pc-for-openfoam-use/92356/5 "2022-10-25T19:38:37Z")

</div>

Also interested in this.  
I’ve downloaded the case file from SimScale, but OpenFOAM is complaining about some files.  
Seems like you have to extract any .gz file (0 folder), and remove references to SimScale in controlDict.  
Working on single-core process now (chtMultiRegionSimpleFoam)
