# Drone Assembly FEA

**URL:** <https://www.simscale.com/forum/t/drone-assembly-fea/64552>\
**Category:** Project Support\
**Created:** [February 28, 2017, 6:18pm UTC](https://www.simscale.com/forum/t/drone-assembly-fea/64552 "2017-02-28T18:18:21Z")\
**Posts on this page:** 1\
**Showing post:** 8

<div class="post-metadata">

**Author:** ![jousefm](https://www.simscale.com/forum/user_avatar/www.simscale.com/jousefm/32/34908_2.png) [@jousefm](https://www.simscale.com/forum/u/jousefm)\
**Post date:** [March 1, 2017, 8:30pm UTC](https://www.simscale.com/forum/t/drone-assembly-fea/64552/8 "2017-03-01T20:30:24Z")

</div>

Hi again @Kynan369,

could you upload a quarter model **with** the rotor and the other components? It is not necessary but just for the sake of good order and running different cases if required.

Please also have a look at this tutorial from @anon67859130: **[Drone Workshop - Session 3](https://www.simscale.com/forum/t/step-by-step-tutorial-homework-of-session-3-level-2/427)**

Think about some load cases that you want to simulate and add them to your project so that I have a basic idea what kind of loads you are trying to investigate.

Regards,

Jousef

---

_[View the full topic](https://www.simscale.com/forum/t/drone-assembly-fea/64552)._