# Convergence Problems

**URL:** <https://www.simscale.com/forum/t/convergence-problems/87693>\
**Category:** Project Support\
**Created:** [February 13, 2020, 3:20pm UTC](https://www.simscale.com/forum/t/convergence-problems/87693 "2020-02-13T15:20:20Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![mde\_mendon\_a\_d](https://www.simscale.com/forum/letter_avatar/mde_mendon_a_d/32/6_449c533f586939b6e5f246632a46421f.png) [@mde\_mendon\_a\_d](https://www.simscale.com/forum/u/mde_mendon_a_d)\
**Post date:** [February 13, 2020, 3:20pm UTC](https://www.simscale.com/forum/t/convergence-problems/87693/1 "2020-02-13T15:20:20Z")

</div>

Good morning to you all, i’m working on a rudder (wing) project, but i don’t whether i’m reaching a good convergence or not. Actually, i would like to reach a better convergence plot, i tried everything, changed the domain, used a more refined mesh and nothing worked. Any help or tip are wellcome. As you all can see in the images below, i made a cartesian box of refinement and all my configurations are bellow, as well as my project’s link.

[https://www.simscale.com/workbench/?pid=162038451122743121&amp;mi=spec%3A9804f6ab-aadf-491e-b586-db1a745a0fda%2Cservice%3AMESHING%2Cstrategy%3A46&amp;ps=geometryPrimitives%2F1&amp;sh=3](https://www.simscale.com/workbench/?pid=162038451122743121&amp;mi=spec%3A9804f6ab-aadf-491e-b586-db1a745a0fda%2Cservice%3AMESHING%2Cstrategy%3A46&amp;ps=geometryPrimitives%2F1&amp;sh=3)

 ![wing%202](https://www.simscale.com/forum/uploads/default/original/3X/6/6/66f8dad2f7036e25334836f76d8900880569c3d2.png) ![wing%203](https://www.simscale.com/forum/uploads/default/original/3X/b/7/b7f228d2db106bea77f9cba24393b385dfd222b3.png) ![wing%204](https://www.simscale.com/forum/uploads/default/original/3X/e/7/e7286ab2765ee2f4cfd54748adb7b8f99cc0288b.png) ![image](https://www.simscale.com/forum/uploads/default/original/3X/6/f/6fe3c596436c7012475d2a46a8d6c8f146845ebd.png)

---

<div class="post-metadata">

**Author:** ![Ricardopg](https://www.simscale.com/forum/user_avatar/www.simscale.com/ricardopg/32/26909_2.png) [@Ricardopg](https://www.simscale.com/forum/u/Ricardopg)\
**Post date:** [February 13, 2020, 5:03pm UTC](https://www.simscale.com/forum/t/convergence-problems/87693/2 "2020-02-13T17:03:34Z")

</div>

Hey @mde_mendon_a_d,

These residual plots are indeed not looking very good. But the wing’s angle of attack is quite high aswell, 45 degrees.

In your first simulation, the mesh is a bit weird. Apparently you assigned a region refinement covering only 2/3 of the wingspan.

 ![image](https://www.simscale.com/forum/uploads/default/original/3X/c/8/c88ea3dc39bb8985a764b003654a1268e38cace5.png)

Take a look at the following sessions of the aerospace workshop: [optimization of a wing - meshing](https://www.simscale.com/forum/t/workshop-2-session-1-homework-optimization-of-a-wing-part-i-meshing/42436) and [optimization of a wing - set up](https://www.simscale.com/forum/t/workshop-2-session-1-homework-optimization-of-a-wing-part-ii/42726). You’ll find the general workflow here. In case of any doubts, please make another post 😛

---

<div class="post-metadata">

**Author:** ![DaleKramer](https://www.simscale.com/forum/user_avatar/www.simscale.com/dalekramer/32/20201_2.png) [@DaleKramer](https://www.simscale.com/forum/u/DaleKramer)\
**Post date:** [February 13, 2020, 8:26pm UTC](https://www.simscale.com/forum/t/convergence-problems/87693/3 "2020-02-13T20:26:34Z")

</div>

Also, try ‘Potential foam initialization’ = ‘ON’ and don’t forget to add at least a ‘Forces and Moments’ results item (preferably a ‘Forces and moments coefficients’ results item), and then run your sim until those results become stable…
