# Condensation simulation

**URL:** <https://www.simscale.com/forum/t/condensation-simulation/100281>\
**Category:** Fluid Flow / CFD\
**Created:** [August 1, 2025, 9:37am UTC](https://www.simscale.com/forum/t/condensation-simulation/100281 "2025-08-01T09:37:02Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![jaat0003](https://www.simscale.com/forum/letter_avatar/jaat0003/32/5_5575768a8748004e209b776fc1b2916d.png) [@jaat0003](https://www.simscale.com/forum/u/jaat0003)\
**Post date:** [August 1, 2025, 9:37am UTC](https://www.simscale.com/forum/t/condensation-simulation/100281/1 "2025-08-01T09:37:02Z")

</div>

Hi all,

I am trying to create a condensation/decondensation simulation. I created a simulation using Conjugate Heat Transfer v2.0 that should reproduce this phenomenon. The relative humidity value on the surface is 100%, but is it possible to check how much moisture has condensed on the surface? Does anyone have a workflow for this kind of request?

If not, can I manually import a model or result to check this?

This result is crucial for me, as it will help me to identify the critical areas.

Thanks in advance!!

---

<div class="post-metadata">

**Author:** ![shenoy](https://www.simscale.com/forum/letter_avatar/shenoy/32/5_5575768a8748004e209b776fc1b2916d.png) [@shenoy](https://www.simscale.com/forum/u/shenoy)\
**Post date:** [October 2, 2025, 11:41am UTC](https://www.simscale.com/forum/t/condensation-simulation/100281/4 "2025-10-02T11:41:23Z")

</div>

Hey @jaat0003 ,

Phase change simulation is [not yet](https://roadmap.simscale.com/tabs/2-under-consideration) possible within SimScale. So there would not be any other examples that you can import either to check this kind of a simulation.

Let us know if you have more questions 🙂

Best,  
Satvik