# CFD Simulation FSAE Car - Simulation Error at 0%

**URL:** https://www.simscale.com/forum/t/cfd-simulation-fsae-car-simulation-error-at-0/83109
**Category:** Project Support
**Created:** [September 19, 2018, 1:10pm UTC](https://www.simscale.com/forum/t/cfd-simulation-fsae-car-simulation-error-at-0/83109 "2018-09-19T13:10:12Z")
**Posts on this page:** 1
**Showing post:** 3

<div class="post-metadata">

### Author: ![Get\_Barried](https://www.simscale.com/forum/user_avatar/www.simscale.com/get_barried/32/20599_2.png) [@Get\_Barried](https://www.simscale.com/forum/u/Get_Barried)
#### Post date: [September 20, 2018, 1:32am UTC](https://www.simscale.com/forum/t/cfd-simulation-fsae-car-simulation-error-at-0/83109/3 "2018-09-20T01:32:18Z")

</div>

Hi @wilove,

Refer to this [post](https://www.simscale.com/forum/t/simulation-does-not-converge/83071/4) I’ve made previously on what despite the same parameters and a successful previous mesh/simulation, future meshes and simulations may not work.

Cheers.

Regards,  
Barry

---

_[View the full topic](https://www.simscale.com/forum/t/cfd-simulation-fsae-car-simulation-error-at-0/83109)._