# CFD FSAE Project - Yaw Study Simulation Error

**URL:** <https://www.simscale.com/forum/t/cfd-fsae-project-yaw-study-simulation-error/82546>\
**Category:** Project Support\
**Created:** [May 24, 2018, 11:35pm UTC](https://www.simscale.com/forum/t/cfd-fsae-project-yaw-study-simulation-error/82546 "2018-05-24T23:35:14Z")\
**Posts on this page:** 1\
**Showing post:** 14

<div class="post-metadata">

**Author:** ![mmccann](https://www.simscale.com/forum/user_avatar/www.simscale.com/mmccann/32/18319_2.png) [@mmccann](https://www.simscale.com/forum/u/mmccann)\
**Post date:** [June 7, 2018, 1:42pm UTC](https://www.simscale.com/forum/t/cfd-fsae-project-yaw-study-simulation-error/82546/14 "2018-06-07T13:42:15Z")

</div>

Hello @Get_Barried,

Importing the file into SimScale was one of the hardest parts I have encountered in SimScale. If I use anything but an STL, SimScale will not mesh correctly, or not allow me to click the individual parts. To get the model into SimScale, I currently have to export it as an STL, and then open it in MeshMixer to split the STL into different parts. If I do not do that last step, it comes into SimScale as one solid and I cannot click any individual parts, only the whole car. Perhaps this is where some of the error is coming from?

Please see this link for more info about how I found out I needed to use MixMesher to do this: [Geometry Disappearing when Meshing - #24 by pfernandez](https://www.simscale.com/forum/t/geometry-disappearing-when-meshing/81827/24)

Thank you!

- Morgan

---

_[View the full topic](https://www.simscale.com/forum/t/cfd-fsae-project-yaw-study-simulation-error/82546)._
