# Accurate simulation?

**URL:** <https://www.simscale.com/forum/t/accurate-simulation/92739>\
**Category:** Project Support\
**Created:** [May 13, 2021, 12:23pm UTC](https://www.simscale.com/forum/t/accurate-simulation/92739 "2021-05-13T12:23:16Z")\
**Posts on this page:** 1\
**Showing post:** 7

<div class="post-metadata">

**Author:** ![ggiraldof](https://www.simscale.com/forum/user_avatar/www.simscale.com/ggiraldof/32/30298_2.png) [@ggiraldof](https://www.simscale.com/forum/u/ggiraldof)\
**Post date:** [May 13, 2021, 1:30pm UTC](https://www.simscale.com/forum/t/accurate-simulation/92739/7 "2021-05-13T13:30:46Z")

</div>

Hi Frank!

Y+ is only computed for the walls, especially those with wall modeling boundary conditions (function or full resolution). Please refer to this article for some background:

> [@What is y+ (yplus)?](https://www.simscale.com/forum/t/what-is-y-yplus/82394):
>
> There can never be a last word in regard to the axioms of any physical theory. All we can ask of them is that they lead to conclusions in agreement with observation. Sooner or later more refined observations will find the weak point in any set of physical axioms. Nature is far too complicated to be completely described in a few equations. - J.L. Synge (1938) \underline{\textbf{Introduction}} Before World War II, Johann Nikuradse (known from the Nikuradse Diagram) took a bunch of velocity meas…

---

_[View the full topic](https://www.simscale.com/forum/t/accurate-simulation/92739)._
