# SimScale Workshops **URL:** https://www.simscale.com/forum/c/workshops-webinars/18.md [Latest](https://www.simscale.com/forum/latest.md) · [Categories](https://www.simscale.com/forum/categories.md) --- ## [Important Note About the Workshops Forum Section](https://www.simscale.com/forum/t/important-note-about-the-workshops-forum-section/95896)
**Author:** [@Ricardopg](https://www.simscale.com/forum/u/Ricardopg)\ **Replies:** 0\ **Last updated:** [July 7, 2022, 8:50pm UTC](https://www.simscale.com/forum/t/important-note-about-the-workshops-forum-section/95896 "2022-07-07T20:50:37Z")
Hello dear SimScaler, Please note that some of the workshops and webinars within this section have been hosted several years ago, therefore the current user interface from SimScale might be different from what it when t… --- ## [Simscale Workshop](https://www.simscale.com/forum/t/simscale-workshop/88901)
**Author:** [@Girish11](https://www.simscale.com/forum/u/Girish11)\ **Replies:** 6\ **Last updated:** [May 27, 2020, 4:39am UTC](https://www.simscale.com/forum/t/simscale-workshop/88901 "2020-05-27T04:39:58Z")
Hello Sir , I have done the drone project on simscale as shown in your workshop (i.e aerodynamic of drone). The issue which I am facing is related to post processing. I am attaching link of my project for you to review… --- ## [Netz dichter als in der Anleitung dargestellt, was mache ich Falsch?](https://www.simscale.com/forum/t/netz-dichter-als-in-der-anleitung-dargestellt-was-mache-ich-falsch/18637)
**Author:** [@petrk](https://www.simscale.com/forum/u/petrk)\ **Replies:** 1\ **Last updated:** [April 24, 2016, 7:32pm UTC](https://www.simscale.com/forum/t/netz-dichter-als-in-der-anleitung-dargestellt-was-mache-ich-falsch/18637 "2016-04-24T19:32:07Z")
Hallo Liebe Mitteilnehmer, ich habe da ein Problem mit den Einstellungen. Wenn ich im Bereich der Aufgabe "High Stress Zone Refinement" bin und die Simulation im MeshCreator starte, dann bekomme ich als Ergebnis ein vi… --- ## [Step-by-Step Tutorial Session 1 - Front Wing Design Study (Part 1)](https://www.simscale.com/forum/t/step-by-step-tutorial-session-1-front-wing-design-study-part-1/78755)
**Author:** [@drodriguez32](https://www.simscale.com/forum/u/drodriguez32)\ **Replies:** 142\ **Last updated:** [July 9, 2020, 12:19pm UTC](https://www.simscale.com/forum/t/step-by-step-tutorial-session-1-front-wing-design-study-part-1/78755 "2020-07-09T12:19:56Z")
Recording Homework Submission For your homework, your task is to investigate the behavior of drag and lift and determine the stall zone for two different front wing flap angles: 6 degrees (standard) and 18 degrees (high… --- ## [Session-2 discussion: Conduction](https://www.simscale.com/forum/t/session-2-discussion-conduction/44851)
**Author:** [@SamPrabhu1](https://www.simscale.com/forum/u/SamPrabhu1)\ **Replies:** 2\ **Last updated:** [May 25, 2020, 9:09pm UTC](https://www.simscale.com/forum/t/session-2-discussion-conduction/44851 "2020-05-25T21:09:24Z")
Conduction: Thermal analysis of LED considering three types of heat sinks Presented by Ahmed Hussain (@ahmedhussain18), CAE Application Engineer Recording: . Case study 1: Thermal analysis of a LED consi… --- ## [Step-by-Step Tutorial: Homework of Session 3 - Level 1](https://www.simscale.com/forum/t/step-by-step-tutorial-homework-of-session-3-level-1/439)
**Author:** [@anon67859130](https://www.simscale.com/forum/u/anon67859130)\ **Replies:** 15\ **Last updated:** [May 21, 2020, 11:08pm UTC](https://www.simscale.com/forum/t/step-by-step-tutorial-homework-of-session-3-level-1/439 "2020-05-21T23:08:39Z")
NOTE: This tutorial was updated on 08/2016 to match the updated version of the platform If you would like to watch the third session of the Drone Workshop again or in the case you missed it, you can access the full re… --- ## [Biomedical Engineering Workshop Session 2: Analysis of Cardiovascular stent](https://www.simscale.com/forum/t/biomedical-engineering-workshop-session-2-analysis-of-cardiovascular-stent/36862)
**Author:** [@anon89049096](https://www.simscale.com/forum/u/anon89049096)\ **Replies:** 8\ **Last updated:** [September 8, 2016, 9:55am UTC](https://www.simscale.com/forum/t/biomedical-engineering-workshop-session-2-analysis-of-cardiovascular-stent/36862 "2016-09-08T09:55:34Z")
Recording Introduction Cardiovascular stents are commonly used in angioplasty in order to treat coronary heart disease. A stent is a small mesh tube that’s used to treat narrow or weak arteries. They are ex… --- ## [Workshop 2 Session 3: Aircraft jet engine vibration analysis](https://www.simscale.com/forum/t/workshop-2-session-3-aircraft-jet-engine-vibration-analysis/87889)
**Author:** [@Ricardopg](https://www.simscale.com/forum/u/Ricardopg)\ **Replies:** 0\ **Last updated:** [March 5, 2020, 12:33am UTC](https://www.simscale.com/forum/t/workshop-2-session-3-aircraft-jet-engine-vibration-analysis/87889 "2020-03-05T00:33:33Z")
Recording Aerospace Workshop II feat. EUROAVIA (Session 3) ― Vibration Analysis of a Jet Engine Exercise Have you ever thought that what exactly will happen to the jet engine if one of the fan blade breaks out? It will … --- ## [Workshop 2 Session 2: Aircraft engine bearing bracket analysis](https://www.simscale.com/forum/t/workshop-2-session-2-aircraft-engine-bearing-bracket-analysis/87715)
**Author:** [@Ricardopg](https://www.simscale.com/forum/u/Ricardopg)\ **Replies:** 0\ **Last updated:** [February 15, 2020, 7:17pm UTC](https://www.simscale.com/forum/t/workshop-2-session-2-aircraft-engine-bearing-bracket-analysis/87715 "2020-02-15T19:17:21Z")
Recording Aerospace Workshop II feat. EUROAVIA (Session 2) ― Structural Analysis of a Jet Engine Bracket Exercise The part we are simulating in this project is an aircraft engine bearing bracket. The function of this br… --- ## [Session 2: Bending of an Airfoil Frame](https://www.simscale.com/forum/t/session-2-bending-of-an-airfoil-frame/87709)
**Author:** [@Ricardopg](https://www.simscale.com/forum/u/Ricardopg)\ **Replies:** 0\ **Last updated:** [February 14, 2020, 10:19pm UTC](https://www.simscale.com/forum/t/session-2-bending-of-an-airfoil-frame/87709 "2020-02-14T22:19:13Z")
Recording Aerospace Workshop feat. EUROAVIA (Session 2) ― Bending of an Airfoil Frame The base model used in this homework session is provided by Aled J Taylor from GrabCAD. Exercise This project involves simulating th… --- ## [Session 3: Natural convection in a kitchen](https://www.simscale.com/forum/t/session-3-natural-convection-in-a-kitchen/87699)
**Author:** [@Ricardopg](https://www.simscale.com/forum/u/Ricardopg)\ **Replies:** 0\ **Last updated:** [February 13, 2020, 9:41pm UTC](https://www.simscale.com/forum/t/session-3-natural-convection-in-a-kitchen/87699 "2020-02-13T21:41:08Z")
Air Conditioning and Ventilation Webinar Natural convection in a kitchen Air Conditioning and Ventilation Workshop (Session 3) ― Heating of a Living Room Import the project by clicking the link below (Ctrl+click to open… --- ## [Session 3: Aerodynamics of an Aircraft - Part II Simulation Setup](https://www.simscale.com/forum/t/session-3-aerodynamics-of-an-aircraft-part-ii-simulation-setup/87653)
**Author:** [@Ricardopg](https://www.simscale.com/forum/u/Ricardopg)\ **Replies:** 0\ **Last updated:** [February 11, 2020, 4:07am UTC](https://www.simscale.com/forum/t/session-3-aerodynamics-of-an-aircraft-part-ii-simulation-setup/87653 "2020-02-11T04:07:56Z")
This post is a continuation of Aerospace Workshop Session 3 - Part I. It contains the tutorial to setup the simulation for Aerodynamics of an aircraft. Simulation Setup A total of 3 different inlet velocities will be s… --- ## [Session 3: Aerodynamics of an Aircraft - Part I Meshing](https://www.simscale.com/forum/t/session-3-aerodynamics-of-an-aircraft-part-i-meshing/87648)
**Author:** [@Ricardopg](https://www.simscale.com/forum/u/Ricardopg)\ **Replies:** 0\ **Last updated:** [February 10, 2020, 9:46pm UTC](https://www.simscale.com/forum/t/session-3-aerodynamics-of-an-aircraft-part-i-meshing/87648 "2020-02-10T21:46:53Z")
Aerospace Workshop Session 3: Aerodynamics of an Aircraft - Part I Meshing Recording Aerospace Workshop feat. EUROAVIA (Session 3) ― Compressible Aerodynamics of an Aircraft This project aims to perform the aerodynamics… --- ## [Workshop 2 Session 1: Optimization of a wing - Part I Meshing](https://www.simscale.com/forum/t/workshop-2-session-1-optimization-of-a-wing-part-i-meshing/87591)
**Author:** [@Ricardopg](https://www.simscale.com/forum/u/Ricardopg)\ **Replies:** 0\ **Last updated:** [February 3, 2020, 9:03pm UTC](https://www.simscale.com/forum/t/workshop-2-session-1-optimization-of-a-wing-part-i-meshing/87591 "2020-02-03T21:03:32Z")
Aerospace Workshop 2 Session 1: Optimization of a wing - Part I Meshing Recording Aerospace Workshop II feat. EUROAVIA (Session 1) ― Aerodynamics of an Aircraft Wing Exercise The task is to optimize an aircraft wing wit… --- ## [Workshop 2 Session 1: Optimization of a wing - Part II](https://www.simscale.com/forum/t/workshop-2-session-1-optimization-of-a-wing-part-ii/87593)
**Author:** [@Ricardopg](https://www.simscale.com/forum/u/Ricardopg)\ **Replies:** 0\ **Last updated:** [February 3, 2020, 11:49pm UTC](https://www.simscale.com/forum/t/workshop-2-session-1-optimization-of-a-wing-part-ii/87593 "2020-02-03T23:49:49Z")
This post is a continuation of Workshop 2 Session 1- Part I Meshing and it contains the tutorial to setup the simulation for Aircraft wing/blended winglet . Simulation Setup We will start off with the Aircraft wing ge… --- ## [Session 1: Air-conditioning simulation of an office space](https://www.simscale.com/forum/t/session-1-air-conditioning-simulation-of-an-office-space/87678)
**Author:** [@Ricardopg](https://www.simscale.com/forum/u/Ricardopg)\ **Replies:** 0\ **Last updated:** [February 13, 2020, 12:14am UTC](https://www.simscale.com/forum/t/session-1-air-conditioning-simulation-of-an-office-space/87678 "2020-02-13T00:14:22Z")
Air Conditioning and Ventilation Webinar Air Conditioning and Ventilation Workshop (Session 1) ― CFD for Data Center Cooling Air-conditioning simulation of an office space Import the project by clicking the link below. … --- ## [Session 2: Smoke propagation in a parking garage](https://www.simscale.com/forum/t/session-2-smoke-propagation-in-a-parking-garage/87627)
**Author:** [@Ricardopg](https://www.simscale.com/forum/u/Ricardopg)\ **Replies:** 0\ **Last updated:** [February 7, 2020, 10:22pm UTC](https://www.simscale.com/forum/t/session-2-smoke-propagation-in-a-parking-garage/87627 "2020-02-07T22:22:54Z")
Homework Assignment for Air-Conditioning and Ventilation webinar: Session-2 Air Conditioning and Ventilation Workshop (Session 2) ― Smoke Propagation in Garage Step-by-Step Import the project by clicking the link below: … --- ## [Session 4: Contamination control of a Clean room](https://www.simscale.com/forum/t/session-4-contamination-control-of-a-clean-room/87612)
**Author:** [@Ricardopg](https://www.simscale.com/forum/u/Ricardopg)\ **Replies:** 0\ **Last updated:** [February 5, 2020, 8:01pm UTC](https://www.simscale.com/forum/t/session-4-contamination-control-of-a-clean-room/87612 "2020-02-05T20:01:12Z")
Air Conditioning and Ventilation Webinar Contamination control design of a Clean room Air Conditioning and Ventilation Workshop (Session 4 ) ― Contamination Control of a Cleanroom Session - 4 Learning Assignment: Ventil… --- ## [Quadcopter CFD](https://www.simscale.com/forum/t/quadcopter-cfd/86847)
**Author:** [@tonyli19970130](https://www.simscale.com/forum/u/tonyli19970130)\ **Replies:** 2\ **Last updated:** [November 14, 2019, 1:18am UTC](https://www.simscale.com/forum/t/quadcopter-cfd/86847 "2019-11-14T01:18:27Z")
Hello All, I recently enrolled in the drone workshop and learned how to use result control to find the lift force for drone. I am wondering if I could use the result control to find out the drag force acting on the dron… --- ## [Residuum in Simulation heat transfer](https://www.simscale.com/forum/t/residuum-in-simulation-heat-transfer/85710)
**Author:** [@wnidens](https://www.simscale.com/forum/u/wnidens)\ **Replies:** 0\ **Last updated:** [June 19, 2019, 12:38pm UTC](https://www.simscale.com/forum/t/residuum-in-simulation-heat-transfer/85710 "2019-06-19T12:38:58Z")
Guten Tag zusammen, ich muss für eine Hausarbeit eine heat simulation in einer Kugel durchführen. Die jetztigen Randbedingungen sind, dass die Kugel im Stationären Zustand von einer Konvekion erwärmt wird. Für die Doku… --- ## [Post Processor](https://www.simscale.com/forum/t/post-processor/84547)
**Author:** [@Girish11](https://www.simscale.com/forum/u/Girish11)\ **Replies:** 1\ **Last updated:** [March 1, 2019, 7:01pm UTC](https://www.simscale.com/forum/t/post-processor/84547 "2019-03-01T19:01:42Z")
Hello Sir, I was going through drone workshop and I am facing difficulty during the pot-processor. I want to see the pressure distribution on the surface of blade of drone. I had use iso-surface option but I am not abl… --- ## [Certificate](https://www.simscale.com/forum/t/certificate/82387)
**Author:** [@rasunag27](https://www.simscale.com/forum/u/rasunag27)\ **Replies:** 8\ **Last updated:** [April 21, 2019, 10:03am UTC](https://www.simscale.com/forum/t/certificate/82387 "2019-04-21T10:03:41Z")
Dear SimScale team, With respect to the above subject, I have completed my CFD Master class course a week back. But I still haven’t received the course completion certificate. May I know when would I receive it? Thanks… --- ## [CFD Master Class session](https://www.simscale.com/forum/t/cfd-master-class-session/83937)
**Author:** [@redwanpranto15](https://www.simscale.com/forum/u/redwanpranto15)\ **Replies:** 7\ **Last updated:** [January 12, 2019, 12:24pm UTC](https://www.simscale.com/forum/t/cfd-master-class-session/83937 "2019-01-12T12:24:36Z")
I am currently undergoing the CFD master class workshop. Now as I am using the free community plan, so due to the computing core limitation I ain’t able to create the meshes with the specified refinement levels in the wo… --- ## [Session 1 - HOMEWORK](https://www.simscale.com/forum/t/session-1-homework/81923)
**Author:** [@drodriguez32](https://www.simscale.com/forum/u/drodriguez32)\ **Replies:** 18\ **Last updated:** [April 16, 2018, 12:13pm UTC](https://www.simscale.com/forum/t/session-1-homework/81923 "2018-04-16T12:13:03Z")
Homework Submission To complete the homework, your task is to fill in the two missing C\_L and C\_D values for the ride height analysis. Ride Height Analysis Drag and Lift Coefficients: Model Name Rake Angle \[^{\\circ… --- ## [Assigning Volumes Result in an Error](https://www.simscale.com/forum/t/assigning-volumes-result-in-an-error/83068)
**Author:** [@ykirigaran](https://www.simscale.com/forum/u/ykirigaran)\ **Replies:** 6\ **Last updated:** [September 11, 2018, 4:03pm UTC](https://www.simscale.com/forum/t/assigning-volumes-result-in-an-error/83068 "2018-09-11T16:03:28Z")
Any one know how to fix this error? refineded surface( 0 volumes )\*\* I mean how to enter values on it --- ## [Step-by-step tutorial for Session 2 of CFD Master Class](https://www.simscale.com/forum/t/step-by-step-tutorial-for-session-2-of-cfd-master-class/45251)
**Author:** [@anon67859130](https://www.simscale.com/forum/u/anon67859130)\ **Replies:** 31\ **Last updated:** [August 17, 2018, 5:50am UTC](https://www.simscale.com/forum/t/step-by-step-tutorial-for-session-2-of-cfd-master-class/45251 "2018-08-17T05:50:45Z")
Recording Exercise Choosing the right numerical settings can help to greatly decrease the computational effort required to run a simulation. However, there are a trade-offs between stability and speed of th… --- ## [Step-by-step tutorial for Session 3 CFD Master Class](https://www.simscale.com/forum/t/step-by-step-tutorial-for-session-3-cfd-master-class/45711)
**Author:** [@anon35769789](https://www.simscale.com/forum/u/anon35769789)\ **Replies:** 12\ **Last updated:** [August 16, 2018, 8:34pm UTC](https://www.simscale.com/forum/t/step-by-step-tutorial-for-session-3-cfd-master-class/45711 "2018-08-16T20:34:01Z")
Recording Exercise In this exercise we will examine how the Courant number affects the stability and simulation time. A high Courant number speeds up the simulation convergence but can lead to instability. … --- ## [DBF Workshop Session 1 - Aerodynamic Study of Model Plane (Part 2)](https://www.simscale.com/forum/t/dbf-workshop-session-1-aerodynamic-study-of-model-plane-part-2/81117)
**Author:** [@drodriguez32](https://www.simscale.com/forum/u/drodriguez32)\ **Replies:** 24\ **Last updated:** [July 27, 2018, 9:49pm UTC](https://www.simscale.com/forum/t/dbf-workshop-session-1-aerodynamic-study-of-model-plane-part-2/81117 "2018-07-27T21:49:34Z")
Link to part 1 of the tutorial: DBF Workshop Session 1 - Aerodynamic Study of Model Plane (Part 1) Introduction Welcome to the second part of the step-by-step tutorial for the simulation of a model airplane. In this pa… --- ## [SimScale Professional Training: Structural Mechanics/FEA](https://www.simscale.com/forum/t/simscale-professional-training-structural-mechanics-fea/82784)
**Author:** [@redwanpranto15](https://www.simscale.com/forum/u/redwanpranto15)\ **Replies:** 1\ **Last updated:** [July 14, 2018, 1:24pm UTC](https://www.simscale.com/forum/t/simscale-professional-training-structural-mechanics-fea/82784 "2018-07-14T13:24:14Z")
In the training exam question it is said that the exam is of 100 points but the points distribution in the question is of 90 points. So it would be very helpful to provide the updated points distribution if any. --- ## [How to get certified by SimScale](https://www.simscale.com/forum/t/how-to-get-certified-by-simscale/82757)
**Author:** [@chandbasha](https://www.simscale.com/forum/u/chandbasha)\ **Replies:** 2\ **Last updated:** [July 10, 2018, 8:34am UTC](https://www.simscale.com/forum/t/how-to-get-certified-by-simscale/82757 "2018-07-10T08:34:25Z")
how to get certified by Simscale, I mean is there any certificates presentation for successfully completing the assignments given to people. if it is, then please someone let me know how to do that. [Next page](https://www.simscale.com/forum/c/workshops-webinars/18.md?page=1)