# Solid Mechanics / FEA

**URL:** https://www.simscale.com/forum/c/using-simscale/fea/10.md?page=1

[Latest](https://www.simscale.com/forum/latest.md) · [Categories](https://www.simscale.com/forum/categories.md)

**Page:** 2

---

## [\[Started\] Cantilever Snap Fit Design](https://www.simscale.com/forum/t/started-cantilever-snap-fit-design/70494)

<div class="topic-metadata">

**Author:** [@anon76722396](https://www.simscale.com/forum/u/anon76722396)\
**Replies:** 0\
**Last updated:** [June 14, 2017, 3:14pm UTC](https://www.simscale.com/forum/t/started-cantilever-snap-fit-design/70494 "2017-06-14T15:14:45Z")

</div>

Status - WIP Started by @atanas\_kuzev. Description: Overview Snap fit joints are one of the simplest ways to join two bodies together. They can be designed to undergo many assembly-disassembly cycles without any adverse…

---

## [Non-linearity models and pressed parts (sheet metal)](https://www.simscale.com/forum/t/non-linearity-models-and-pressed-parts-sheet-metal/97195)

<div class="topic-metadata">

**Author:** [@d255bd86187443](https://www.simscale.com/forum/u/d255bd86187443)\
**Replies:** 1\
**Last updated:** [June 13, 2023, 1:13pm UTC](https://www.simscale.com/forum/t/non-linearity-models-and-pressed-parts-sheet-metal/97195 "2023-06-13T13:13:41Z")

</div>

Hello SIMSCALE people, I was wondering if someone can help me. I am dealing with pressed parts (sheet metal bends etc) and one would assume that such part at the bend region would have undergone plastic deformation maki…

---

## [Composites CFRP modeling](https://www.simscale.com/forum/t/composites-cfrp-modeling/97086)

<div class="topic-metadata">

**Author:** [@yblanchard](https://www.simscale.com/forum/u/yblanchard)\
**Replies:** 1\
**Last updated:** [May 15, 2023, 2:52pm UTC](https://www.simscale.com/forum/t/composites-cfrp-modeling/97086 "2023-05-15T14:52:57Z")

</div>

Hello, I would like to know if laminage modeling and composites calculations can be done with SimScale today, Especially, if CFRP (continuous Carbon fiber) modeling applied for additive Manufacturing processes can be d…

---

## [Iso Volume filter. cannot set range](https://www.simscale.com/forum/t/iso-volume-filter-cannot-set-range/96818)

<div class="topic-metadata">

**Author:** [@mkw](https://www.simscale.com/forum/u/mkw)\
**Replies:** 3\
**Last updated:** [March 14, 2023, 8:06pm UTC](https://www.simscale.com/forum/t/iso-volume-filter-cannot-set-range/96818 "2023-03-14T20:06:05Z")

</div>

Hi, according to this thread, the ISO Volume bug is resolved, but I get exactly the same behaviour when trying to set the Iso Volume filter. Can You please check?

---

## [Can I model frictional contacts in SimScale FEA?](https://www.simscale.com/forum/t/can-i-model-frictional-contacts-in-simscale-fea/96661)

<div class="topic-metadata">

**Author:** [@itsavlidis](https://www.simscale.com/forum/u/itsavlidis)\
**Replies:** 0\
**Last updated:** [January 31, 2023, 8:46am UTC](https://www.simscale.com/forum/t/can-i-model-frictional-contacts-in-simscale-fea/96661 "2023-01-31T08:46:16Z")

</div>

Yes, Including friction in your simulation is important when friction effects among contacting surfaces are expected to be crucial. Friction can added to any physical contact. Physical contacts imply that we are alread…

---

## [Weather File to Wind Loads](https://www.simscale.com/forum/t/weather-file-to-wind-loads/96653)

<div class="topic-metadata">

**Author:** [@dilroz\_rana](https://www.simscale.com/forum/u/dilroz_rana)\
**Replies:** 1\
**Last updated:** [January 27, 2023, 7:00am UTC](https://www.simscale.com/forum/t/weather-file-to-wind-loads/96653 "2023-01-27T07:00:06Z")

</div>

Hi everyone, I’m wondering if it is possible in SimScale, to somehow input a weather file of a region to generate wind loads. I am asking because the location of my building site does not have a building code that defin…

---

## [Problem with Static Run -- Not enough memory](https://www.simscale.com/forum/t/problem-with-static-run-not-enough-memory/96557)

<div class="topic-metadata">

**Author:** [@melizabeth](https://www.simscale.com/forum/u/melizabeth)\
**Replies:** 2\
**Last updated:** [December 29, 2022, 10:45am UTC](https://www.simscale.com/forum/t/problem-with-static-run-not-enough-memory/96557 "2022-12-29T10:45:05Z")

</div>

The following simulation run(s) failed: Run 1 An error appeared while allocating memory. If you are using the Multfront or LDLDT solver, please choose a larger machine by increasing the number of computing cores. Fo…

---

## [How to measure Reaction and Contact Forces](https://www.simscale.com/forum/t/how-to-measure-reaction-and-contact-forces/96553)

<div class="topic-metadata">

**Author:** [@aarafat\_7](https://www.simscale.com/forum/u/aarafat_7)\
**Replies:** 0\
**Last updated:** [December 27, 2022, 10:25am UTC](https://www.simscale.com/forum/t/how-to-measure-reaction-and-contact-forces/96553 "2022-12-27T10:25:21Z")

</div>

How to measure Reaction and Contact Forces For Static or Dynamic simulation the problem is often easier to solve by specifying a defined displacement or velocity e.g for Snap fit cases or other impact cases. For such c…

---

## [Load balance check in FEA to verify results](https://www.simscale.com/forum/t/load-balance-check-in-fea-to-verify-results/96434)

<div class="topic-metadata">

**Author:** [@itsavlidis](https://www.simscale.com/forum/u/itsavlidis)\
**Replies:** 0\
**Last updated:** [November 29, 2022, 7:51pm UTC](https://www.simscale.com/forum/t/load-balance-check-in-fea-to-verify-results/96434 "2022-11-29T19:51:03Z")

</div>

It is always a good post-solve practice to check the overall load balance of our models as a means of result verification. Simply by adding a Reaction Force result control we can inspect the overall reaction force on th…

---

## [Can I calculate a factor of safety in SimScale?](https://www.simscale.com/forum/t/can-i-calculate-a-factor-of-safety-in-simscale/96361)

<div class="topic-metadata">

**Author:** [@ataleb](https://www.simscale.com/forum/u/ataleb)\
**Replies:** 0\
**Last updated:** [November 14, 2022, 11:41pm UTC](https://www.simscale.com/forum/t/can-i-calculate-a-factor-of-safety-in-simscale/96361 "2022-11-14T23:41:17Z")

</div>

Ensuring compliance with factors of safety is a requirement in many industries. With the new Field Calculator you can carry out calculations with the field values that SimScale has output from a simulation. The formula …

---

## [Account for damping in Seismic Analysis - Hysteretic Damping](https://www.simscale.com/forum/t/account-for-damping-in-seismic-analysis-hysteretic-damping/96351)

<div class="topic-metadata">

**Author:** [@itsavlidis](https://www.simscale.com/forum/u/itsavlidis)\
**Replies:** 0\
**Last updated:** [November 10, 2022, 2:29pm UTC](https://www.simscale.com/forum/t/account-for-damping-in-seismic-analysis-hysteretic-damping/96351 "2022-11-10T14:29:50Z")

</div>

Seismic analysis refers to the calculation of the behavior of a building or a structure in general, under earthquake loading. A common computational approach is to study the effect of the acceleration spectrum of an eart…

---

## [Solution matrix is not factorizable](https://www.simscale.com/forum/t/solution-matrix-is-not-factorizable/96204)

<div class="topic-metadata">

**Author:** [@anon9613397](https://www.simscale.com/forum/u/anon9613397)\
**Replies:** 4\
**Last updated:** [October 20, 2022, 11:49am UTC](https://www.simscale.com/forum/t/solution-matrix-is-not-factorizable/96204 "2022-10-20T11:49:20Z")

</div>

HI iam getting this error after using mumps solver, and I am not sure why I am receiving this error I shared my project if you like to have a look

---

## [Simulation of a Lathe, forces on tool and spindle](https://www.simscale.com/forum/t/simulation-of-a-lathe-forces-on-tool-and-spindle/96197)

<div class="topic-metadata">

**Author:** [@wmay](https://www.simscale.com/forum/u/wmay)\
**Replies:** 1\
**Last updated:** [October 11, 2022, 6:50pm UTC](https://www.simscale.com/forum/t/simulation-of-a-lathe-forces-on-tool-and-spindle/96197 "2022-10-11T18:50:36Z")

</div>

Hello, Using a lathe the workpiece is mounted on a turning spindle. A fixed tool then cuts chips from the workpiece. The turning workpiece produces forces on the tool, mainly dependant on the interaction surface b…

---

## [Analysis of loads in piping stress](https://www.simscale.com/forum/t/analysis-of-loads-in-piping-stress/301)

<div class="topic-metadata">

**Author:** [@faisalkhan599](https://www.simscale.com/forum/u/faisalkhan599)\
**Replies:** 3\
**Last updated:** [October 15, 2015, 11:46am UTC](https://www.simscale.com/forum/t/analysis-of-loads-in-piping-stress/301 "2015-10-15T11:46:39Z")

</div>

What are the effects of different loads which concerns with piping stress

---

## [How can we add a load depending on variables using SimScale?](https://www.simscale.com/forum/t/how-can-we-add-a-load-depending-on-variables-using-simscale/11069)

<div class="topic-metadata">

**Author:** [@anon27583411](https://www.simscale.com/forum/u/anon27583411)\
**Replies:** 0\
**Last updated:** [March 2, 2016, 1:06pm UTC](https://www.simscale.com/forum/t/how-can-we-add-a-load-depending-on-variables-using-simscale/11069 "2016-03-02T13:06:15Z")

</div>

Often we want to prescribe values of loads depending on direction. Let us consider an example. Suppose we want to apply pressure which is dependent on z direction. The following description will help: 1.SimScale allows …

---

## [Hinged boundary condition](https://www.simscale.com/forum/t/hinged-boundary-condition/96132)

<div class="topic-metadata">

**Author:** [@Johannes\_ACKVA](https://www.simscale.com/forum/u/Johannes_ACKVA)\
**Replies:** 3\
**Last updated:** [September 15, 2022, 2:21pm UTC](https://www.simscale.com/forum/t/hinged-boundary-condition/96132 "2022-09-15T14:21:07Z")

</div>

question about hinged boundary condition, for example a beam hinged at both ends. It would be done with Boundary Conditions - Fixed Support, and then fixing only nodes along a line. But how can I select edges or nodes? I…

---

## [The desired residual of the MUMPS solver could not be achieved](https://www.simscale.com/forum/t/the-desired-residual-of-the-mumps-solver-could-not-be-achieved/96119)

<div class="topic-metadata">

**Author:** [@anon9613397](https://www.simscale.com/forum/u/anon9613397)\
**Replies:** 1\
**Last updated:** [September 12, 2022, 8:04am UTC](https://www.simscale.com/forum/t/the-desired-residual-of-the-mumps-solver-could-not-be-achieved/96119 "2022-09-12T08:04:59Z")

</div>

I have been trying to run this simulation so many times, but have not succeeded yet, I tried to increase the mesh and to use the automatic contact detection only, but it is still coming up with this error. project link; …

---

## [The Finite Element Method - Fundamentals - Physical Problems \[2\]](https://www.simscale.com/forum/t/the-finite-element-method-fundamentals-physical-problems-2/28665)

<div class="topic-metadata">

**Author:** [@jousefm](https://www.simscale.com/forum/u/jousefm)\
**Replies:** 7\
**Last updated:** [September 9, 2022, 2:40pm UTC](https://www.simscale.com/forum/t/the-finite-element-method-fundamentals-physical-problems-2/28665 "2022-09-09T14:40:34Z")

</div>

Elastostatics The momentum balance is given by div(\\underline{\\underline{\\sigma}}\\mathbf{(x)}) + \\underline{b}\\mathbf{(x)} = \\rho\\underline{\\ddot{u}}\\mathbf{(x)} \\tag{$\\underline{\\underline{\\sigma}}=\\underline{\\underli…

---

## [How to constrain body to be solved as static problem](https://www.simscale.com/forum/t/how-to-constrain-body-to-be-solved-as-static-problem/96075)

<div class="topic-metadata">

**Author:** [@anon9613397](https://www.simscale.com/forum/u/anon9613397)\
**Replies:** 2\
**Last updated:** [August 30, 2022, 9:55pm UTC](https://www.simscale.com/forum/t/how-to-constrain-body-to-be-solved-as-static-problem/96075 "2022-08-30T21:55:56Z")

</div>

hi I am trying to model a part that is sliding on a floor that is subjected to force as shown in the image, but usually, I get an error: residual can not be achieved for MUMPS solver. I am using high-density polyethylen…

---

## [Memory allocation problem](https://www.simscale.com/forum/t/memory-allocation-problem/95273)

<div class="topic-metadata">

**Author:** [@anon9613397](https://www.simscale.com/forum/u/anon9613397)\
**Replies:** 4\
**Last updated:** [August 3, 2022, 11:08am UTC](https://www.simscale.com/forum/t/memory-allocation-problem/95273 "2022-08-03T11:08:57Z")

</div>

An error appeared while allocating memory. If you are using the Multfront, LDLDT or GCPC solver, please choose a larger machine by increasing the number of computing cores. For the MUMPS and PETSC solvers, you should add…

---

## [Porous media in Advanced concepts](https://www.simscale.com/forum/t/porous-media-in-advanced-concepts/95903)

<div class="topic-metadata">

**Author:** [@alishsan](https://www.simscale.com/forum/u/alishsan)\
**Replies:** 2\
**Last updated:** [July 11, 2022, 2:09pm UTC](https://www.simscale.com/forum/t/porous-media-in-advanced-concepts/95903 "2022-07-11T14:09:40Z")

</div>

Hi there! I am trying to use porous media in my project. I read here that we can do it via Advanced concepts: Advanced Concepts | Simulation Setup | SimScale. However, when I click on Advanced concepts in the simulatio…

---

## [Simulation Problem - FEA](https://www.simscale.com/forum/t/simulation-problem-fea/82694)

<div class="topic-metadata">

**Author:** [@mezo\_eleraky](https://www.simscale.com/forum/u/mezo_eleraky)\
**Replies:** 1\
**Last updated:** [June 29, 2018, 5:08pm UTC](https://www.simscale.com/forum/t/simulation-problem-fea/82694 "2018-06-29T17:08:24Z")

</div>

Hi i want to solve this problem ,Can anyone helps me ,please ?

---

## [Session 1 Step-by-Step Tutorial - Stress Analysis of a Formula Student Front Upright](https://www.simscale.com/forum/t/session-1-step-by-step-tutorial-stress-analysis-of-a-formula-student-front-upright/81199)

<div class="topic-metadata">

**Author:** [@anon18194957](https://www.simscale.com/forum/u/anon18194957)\
**Replies:** 2\
**Last updated:** [April 4, 2018, 8:08am UTC](https://www.simscale.com/forum/t/session-1-step-by-step-tutorial-stress-analysis-of-a-formula-student-front-upright/81199 "2018-04-04T08:08:06Z")

</div>

Recording Homework Submission For your homework, your task is to setup a steady-state structural analysis of an aluminum front suspension upright and analyze the results for stress and deformation. The st…

---

## [Kinematic Rigid Body Dynamics](https://www.simscale.com/forum/t/kinematic-rigid-body-dynamics/81470)

<div class="topic-metadata">

**Author:** [@JoseCaballero](https://www.simscale.com/forum/u/JoseCaballero)\
**Replies:** 1\
**Last updated:** [January 18, 2018, 8:19am UTC](https://www.simscale.com/forum/t/kinematic-rigid-body-dynamics/81470 "2018-01-18T08:19:20Z")

</div>

Hello, Is it posible to perform a kinematic simulation like in Solidworks motion analysis or Ansys Rigid Body dynamics?. If not, does anyone know of a tool that can be used with inshape or Fusion 360? Thanks in Advance. …

---

## [FE Static analysis with imposed displacement](https://www.simscale.com/forum/t/fe-static-analysis-with-imposed-displacement/82652)

<div class="topic-metadata">

**Author:** [@ade\_montgros](https://www.simscale.com/forum/u/ade_montgros)\
**Replies:** 5\
**Last updated:** [June 20, 2018, 7:37am UTC](https://www.simscale.com/forum/t/fe-static-analysis-with-imposed-displacement/82652 "2018-06-20T07:37:00Z")

</div>

Hi, In a static FE analysis instead of imposing a load at some specific locations on the geometry, would it be possible to impose displacement and get the required load at these locations as a result? Many thanks Arme…

---

## [Different types of stresses and strains](https://www.simscale.com/forum/t/different-types-of-stresses-and-strains/95849)

<div class="topic-metadata">

**Author:** [@smohaimenul\_is](https://www.simscale.com/forum/u/smohaimenul_is)\
**Replies:** 1\
**Last updated:** [June 27, 2022, 7:31am UTC](https://www.simscale.com/forum/t/different-types-of-stresses-and-strains/95849 "2022-06-27T07:31:51Z")

</div>

Hi! It is a static nonlinear analysis. When extracting the result data, under the stress option, there are two types of stresses: Cauchy stress and von mises stress. My question is which one is the engineering stress a…

---

## [Hyperealsticity - Neo-Hookean material model](https://www.simscale.com/forum/t/hyperealsticity-neo-hookean-material-model/95259)

<div class="topic-metadata">

**Author:** [@ruebenko](https://www.simscale.com/forum/u/ruebenko)\
**Replies:** 2\
**Last updated:** [April 8, 2022, 11:10am UTC](https://www.simscale.com/forum/t/hyperealsticity-neo-hookean-material-model/95259 "2022-04-08T11:10:56Z")

</div>

I am trying to make a simple example of a nonlinear static solid mechanics model. For this I used a unit cubid \[0,1\]^3. At x==0 the cuboid is fully constraint (u=v=w=0 displacement) and at x==1 I apply a force of 1N in t…

---

## [C - Rivet Press](https://www.simscale.com/forum/t/c-rivet-press/95257)

<div class="topic-metadata">

**Author:** [@nbos](https://www.simscale.com/forum/u/nbos)\
**Replies:** 3\
**Last updated:** [April 8, 2022, 10:18am UTC](https://www.simscale.com/forum/t/c-rivet-press/95257 "2022-04-08T10:18:52Z")

</div>

Hey, I need to design a frame for a rivet press. It will be a C shape and I want to determine how thick the material should be. Now I have run a simulation like in the screenshot. But I don’t feel good about this. In pr…

---

## [Issue with modeling two mating gear in dynamic analysis ( the two gears are interfering )](https://www.simscale.com/forum/t/issue-with-modeling-two-mating-gear-in-dynamic-analysis-the-two-gears-are-interfering/95174)

<div class="topic-metadata">

**Author:** [@anon9613397](https://www.simscale.com/forum/u/anon9613397)\
**Replies:** 1\
**Last updated:** [March 21, 2022, 7:37am UTC](https://www.simscale.com/forum/t/issue-with-modeling-two-mating-gear-in-dynamic-analysis-the-two-gears-are-interfering/95174 "2022-03-21T07:37:16Z")

</div>

I have a problem with modeling two mating gear in dynamic analysis in which the two mating gears are interfering although I set the physical contact properly project link thanks in advance

---

## [How to judge which result is good?](https://www.simscale.com/forum/t/how-to-judge-which-result-is-good/95115)

<div class="topic-metadata">

**Author:** [@hangchang0001](https://www.simscale.com/forum/u/hangchang0001)\
**Replies:** 3\
**Last updated:** [March 11, 2022, 1:54am UTC](https://www.simscale.com/forum/t/how-to-judge-which-result-is-good/95115 "2022-03-11T01:54:24Z")

</div>

Hello There! I did a simple FEA simulation for a sheet metal as a support. I have run the program with different mesh qualities from 5 to 10. But the results show different max. displacement from 0.3 to ~3, respectively.…

[Previous page](https://www.simscale.com/forum/c/using-simscale/fea/10.md)

[Next page](https://www.simscale.com/forum/c/using-simscale/fea/10.md?page=2)
