# CAD & Meshing

**URL:** https://www.simscale.com/forum/c/using-simscale/cad/9.md

[Latest](https://www.simscale.com/forum/latest.md) · [Categories](https://www.simscale.com/forum/categories.md)

---

## [A collection for CAD & Meshing resources](https://www.simscale.com/forum/t/a-collection-for-cad-meshing-resources/70652)

<div class="topic-metadata">

**Author:** [@jousefm](https://www.simscale.com/forum/u/jousefm)\
**Replies:** 0\
**Last updated:** [June 18, 2017, 11:01am UTC](https://www.simscale.com/forum/t/a-collection-for-cad-meshing-resources/70652 "2017-06-18T11:01:08Z")

</div>

Cad & Meshing on our SimWiki \\underline{\\textbf{Workshops related to CAD & Meshing:}} Almost every workshop we offer contains the basics of how to create a mesh and work with it in a proper way. But there are some wo…

---

## [Very thin boundary layers and y+ on complex geometry](https://www.simscale.com/forum/t/very-thin-boundary-layers-and-y-on-complex-geometry/84943)

<div class="topic-metadata">

**Author:** [@jhartung](https://www.simscale.com/forum/u/jhartung)\
**Replies:** 188\
**Last updated:** [November 17, 2026, 5:51pm UTC](https://www.simscale.com/forum/t/very-thin-boundary-layers-and-y-on-complex-geometry/84943 "2026-11-17T17:51:02Z")

</div>

Hi folks, Okay on my simulation I’ve been using the default boundary layer inflation values with relative sizing. This is achieving y+ values that are a bit high for me to feel confident in them. I have followed the mas…

---

## [Meshing error](https://www.simscale.com/forum/t/meshing-error/101388)

<div class="topic-metadata">

**Author:** [@upasse](https://www.simscale.com/forum/u/upasse)\
**Replies:** 0\
**Last updated:** [October 8, 2026, 4:52pm UTC](https://www.simscale.com/forum/t/meshing-error/101388 "2026-10-08T16:52:21Z")

</div>

Run 2 Velocity field started diverging to a value of 1.10082e+07 m/s near the position: (27.09, 26.69, -2.818). Please check the mesh quality near the reported location and try refining the mesh. If the problem occurre…

---

## [Creating inner flow volume](https://www.simscale.com/forum/t/creating-inner-flow-volume/101387)

<div class="topic-metadata">

**Author:** [@upasse](https://www.simscale.com/forum/u/upasse)\
**Replies:** 0\
**Last updated:** [October 7, 2026, 10:15pm UTC](https://www.simscale.com/forum/t/creating-inner-flow-volume/101387 "2026-10-07T22:15:16Z")

</div>

Hello I want to created an inner flow volume with this Rhino model, the instruction are not clear how and why this does not work, can someone send me a visual example what I need to change? I have two boxes with inner v…

---

## [Struggling with Meshing on a Complex Geometry](https://www.simscale.com/forum/t/struggling-with-meshing-on-a-complex-geometry/101185)

<div class="topic-metadata">

**Author:** [@pwolf3848](https://www.simscale.com/forum/u/pwolf3848)\
**Replies:** 2\
**Last updated:** [September 24, 2026, 6:31pm UTC](https://www.simscale.com/forum/t/struggling-with-meshing-on-a-complex-geometry/101185 "2026-09-24T18:31:40Z")

</div>

Hi everyone, I’m working on a simulation for a new heat sink design and am running into meshing issues. The geometry is fairly complex with many small fins, and the mesh keeps failing near the edges. Here is a link to …

---

## [Complex Geometry Meshing](https://www.simscale.com/forum/t/complex-geometry-meshing/101289)

<div class="topic-metadata">

**Author:** [@lmw14](https://www.simscale.com/forum/u/lmw14)\
**Replies:** 1\
**Last updated:** [August 24, 2026, 3:50am UTC](https://www.simscale.com/forum/t/complex-geometry-meshing/101289 "2026-08-24T03:50:25Z")

</div>

Hi, I have a very complex engine geometry and struggle with generating a mesh. Which settings do I best use for it? Has anyone been at this point and figured it out?

---

## [Combustion Engine Meshing Problems](https://www.simscale.com/forum/t/combustion-engine-meshing-problems/101282)

<div class="topic-metadata">

**Author:** [@lmw14](https://www.simscale.com/forum/u/lmw14)\
**Replies:** 1\
**Last updated:** [August 21, 2026, 3:44pm UTC](https://www.simscale.com/forum/t/combustion-engine-meshing-problems/101282 "2026-08-21T15:44:30Z")

</div>

Hi, for my thesis I’m currently creating a conjugate heat transfer simulation. The meshing is not working for my current CAD, because due to the import and translation SimScale itself is generating faults in the model. …

---

## ["An error occurred” after job preparation / Fatal IO Error](https://www.simscale.com/forum/t/an-error-occurred-after-job-preparation-fatal-io-error/101272)

<div class="topic-metadata">

**Author:** [@dhandley](https://www.simscale.com/forum/u/dhandley)\
**Replies:** 1\
**Last updated:** [August 11, 2026, 4:05pm UTC](https://www.simscale.com/forum/t/an-error-occurred-after-job-preparation-fatal-io-error/101272 "2026-08-11T16:05:09Z")

</div>

Hi all, I’m very new to SimScale and FEA in general, so I’m hoping someone can point me in the right direction. I’m currently trying to run a static structural analysis of a caravan chassis, mainly to check the chassis…

---

## [Why is my simulation wrong? Where was my mistake?](https://www.simscale.com/forum/t/why-is-my-simulation-wrong-where-was-my-mistake/101141)

<div class="topic-metadata">

**Author:** [@timmi](https://www.simscale.com/forum/u/timmi)\
**Replies:** 8\
**Last updated:** [June 28, 2026, 6:25pm UTC](https://www.simscale.com/forum/t/why-is-my-simulation-wrong-where-was-my-mistake/101141 "2026-06-28T18:25:20Z")

</div>

Dear Ladies and Gentleman, i started yesterday my new simulation with a new reference body and somehow it didn´t simulate my geometry but the simulation area itself. I will give you a detailed instruction on what I did …

---

## [How to Import Mesh and solid bodys together](https://www.simscale.com/forum/t/how-to-import-mesh-and-solid-bodys-together/101103)

<div class="topic-metadata">

**Author:** [@timmi](https://www.simscale.com/forum/u/timmi)\
**Replies:** 10\
**Last updated:** [June 16, 2026, 8:52pm UTC](https://www.simscale.com/forum/t/how-to-import-mesh-and-solid-bodys-together/101103 "2026-06-16T20:52:44Z")

</div>

Hello everyone, I am currently working on an aerodynamic project and have encountered an issue when importing my geometry into SimScale. I created an assembly in Autodesk Inventor (.iam) consisting of a BMW M4 referenc…

---

## [Problems in Boundary Layer Generation for Aerodynamic Analysis](https://www.simscale.com/forum/t/problems-in-boundary-layer-generation-for-aerodynamic-analysis/101053)

<div class="topic-metadata">

**Author:** [@rohan\_22ume057](https://www.simscale.com/forum/u/rohan_22ume057)\
**Replies:** 3\
**Last updated:** [May 20, 2026, 8:08pm UTC](https://www.simscale.com/forum/t/problems-in-boundary-layer-generation-for-aerodynamic-analysis/101053 "2026-05-20T20:08:05Z")

</div>

Hi, I am trying to mesh my design for the CFD simulation of a Formula 1 front wing. But even though I am using the parametric hex dominant mode, I seem to encounter a problem where my boundary layers are not being genera…

---

## [Region refinments being overwritten by general settings (hex-dominant method)](https://www.simscale.com/forum/t/region-refinments-being-overwritten-by-general-settings-hex-dominant-method/100948)

<div class="topic-metadata">

**Author:** [@TompintoNFS](https://www.simscale.com/forum/u/TompintoNFS)\
**Replies:** 1\
**Last updated:** [April 6, 2026, 8:36pm UTC](https://www.simscale.com/forum/t/region-refinments-being-overwritten-by-general-settings-hex-dominant-method/100948 "2026-04-06T20:36:21Z")

</div>

Hi SimScale Community! I’m having a problem generating specific regions with specific cell sizes (meters) using the Hex-Dominant method to generate a mesh. Describing a bit the problem I have defined the overall mesh si…

---

## [Optimizing Urban Terrain Mesh on Community License: Reducing Cell Count for UHI/Microclimate Studies](https://www.simscale.com/forum/t/optimizing-urban-terrain-mesh-on-community-license-reducing-cell-count-for-uhi-microclimate-studies/100895)

<div class="topic-metadata">

**Author:** [@akriger](https://www.simscale.com/forum/u/akriger)\
**Replies:** 1\
**Last updated:** [March 25, 2026, 2:39pm UTC](https://www.simscale.com/forum/t/optimizing-urban-terrain-mesh-on-community-license-reducing-cell-count-for-uhi-microclimate-studies/100895 "2026-03-25T14:39:15Z")

</div>

Hi everyone, I am experimenting with a microclimate (Wind) and Urban Heat Island (UHI) study for the South African Astronomical Observatory (SAAO) in Cape Town using a custom geospatial framework. I am currently on a Co…

---

## [Difficulty selecting only "Faces" for Wall Boundary Condition with 27 Solid Bodies](https://www.simscale.com/forum/t/difficulty-selecting-only-faces-for-wall-boundary-condition-with-27-solid-bodies/100881)

<div class="topic-metadata">

**Author:** [@akriger](https://www.simscale.com/forum/u/akriger)\
**Replies:** 1\
**Last updated:** [March 22, 2026, 12:18pm UTC](https://www.simscale.com/forum/t/difficulty-selecting-only-faces-for-wall-boundary-condition-with-27-solid-bodies/100881 "2026-03-22T12:18:12Z")

</div>

Hi everyone, I am working on an incompressible wind simulation of a 3D city model (SAAO site in Cape Town). My geometry is a STEP file consisting of 27 Solid Bodies (26 buildings and 1 terrain volume) with a total of 5,…

---

## [Meshing problem](https://www.simscale.com/forum/t/meshing-problem/100667)

<div class="topic-metadata">

**Author:** [@aryan\_srivasta](https://www.simscale.com/forum/u/aryan_srivasta)\
**Replies:** 1\
**Last updated:** [February 26, 2026, 10:36pm UTC](https://www.simscale.com/forum/t/meshing-problem/100667 "2026-02-26T22:36:57Z")

</div>

Hi, I’m following the Tutorial on Incompressible Flow around a Formula Student Car. Project link: SimScale Login As I’m creating a mesh, I am getting insane values for non-orthogonality. I have tried simplifying the C…

---

## [Issue with meshing of ITO electrode ](https://www.simscale.com/forum/t/issue-with-meshing-of-ito-electrode/100733)

<div class="topic-metadata">

**Author:** [@JosephL](https://www.simscale.com/forum/u/JosephL)\
**Replies:** 1\
**Last updated:** [February 9, 2026, 4:30pm UTC](https://www.simscale.com/forum/t/issue-with-meshing-of-ito-electrode/100733 "2026-02-09T16:30:28Z")

</div>

Hello, I am a ASE student conducting research on an active ITO system and I am running into issues with meshing the system to visualize the magnetic field generated. I believe that the issue is in the sizing for the devi…

---

## [Small feature suppression error ](https://www.simscale.com/forum/t/small-feature-suppression-error/100664)

<div class="topic-metadata">

**Author:** [@Gregory3832](https://www.simscale.com/forum/u/Gregory3832)\
**Replies:** 1\
**Last updated:** [January 14, 2026, 7:21pm UTC](https://www.simscale.com/forum/t/small-feature-suppression-error/100664 "2026-01-14T19:21:22Z")

</div>

Can someone help me with this its in the Compressible flow around a wing Tutorial

---

## [Mesh Generation Problem](https://www.simscale.com/forum/t/mesh-generation-problem/100640)

<div class="topic-metadata">

**Author:** [@RacerR](https://www.simscale.com/forum/u/RacerR)\
**Replies:** 1\
**Last updated:** [January 7, 2026, 4:51pm UTC](https://www.simscale.com/forum/t/mesh-generation-problem/100640 "2026-01-07T16:51:25Z")

</div>

---

## [.MED File Upload Issues](https://www.simscale.com/forum/t/med-file-upload-issues/100630)

<div class="topic-metadata">

**Author:** [@amcc](https://www.simscale.com/forum/u/amcc)\
**Replies:** 4\
**Last updated:** [December 31, 2025, 2:30am UTC](https://www.simscale.com/forum/t/med-file-upload-issues/100630 "2025-12-31T02:30:43Z")

</div>

Good day, I am working on an linear structural analysis of a steel shaft. Here is the model from onshape with faces partitioned: This project quickly turned into how to get Simscale to accept a .med file. I have rea…

---

## [Exporting mesh from ANSA to Simscale](https://www.simscale.com/forum/t/exporting-mesh-from-ansa-to-simscale/100552)

<div class="topic-metadata">

**Author:** [@findolfo](https://www.simscale.com/forum/u/findolfo)\
**Replies:** 1\
**Last updated:** [December 6, 2025, 9:52pm UTC](https://www.simscale.com/forum/t/exporting-mesh-from-ansa-to-simscale/100552 "2025-12-06T21:52:01Z")

</div>

Hi, I’d like to know how can I export a mesh from ANSA that is compatible for Simscale. I have read that the format supported is openfoam but until now I have been able to export mesh only in binary format and not ASCII

---

## [Downloading the mesh from SimScale](https://www.simscale.com/forum/t/downloading-the-mesh-from-simscale/100484)

<div class="topic-metadata">

**Author:** [@555grand](https://www.simscale.com/forum/u/555grand)\
**Replies:** 1\
**Last updated:** [October 24, 2025, 9:07am UTC](https://www.simscale.com/forum/t/downloading-the-mesh-from-simscale/100484 "2025-10-24T09:07:19Z")

</div>

Hellow, guys! Please tell, can I download a file with mesh created for a model, but before the simulation starts? How to do that?

---

## [Meshing failure with Volume custom sizing](https://www.simscale.com/forum/t/meshing-failure-with-volume-custom-sizing/100452)

<div class="topic-metadata">

**Author:** [@wostling](https://www.simscale.com/forum/u/wostling)\
**Replies:** 4\
**Last updated:** [October 13, 2025, 4:10pm UTC](https://www.simscale.com/forum/t/meshing-failure-with-volume-custom-sizing/100452 "2025-10-13T16:10:41Z")

</div>

Hi! I am currently using cartesian box primitives to volume control mesh a portion of my flow volume like so: These jobs have meshed correctly in the past, however when I try to remesh I mesh I created ~15 hours a…

---

## [Hex-dominant in the solver Conjugate Heat Transfer v2.0](https://www.simscale.com/forum/t/hex-dominant-in-the-solver-conjugate-heat-transfer-v2-0/100416)

<div class="topic-metadata">

**Author:** [@evangtsichlas](https://www.simscale.com/forum/u/evangtsichlas)\
**Replies:** 2\
**Last updated:** [September 23, 2025, 3:39pm UTC](https://www.simscale.com/forum/t/hex-dominant-in-the-solver-conjugate-heat-transfer-v2-0/100416 "2025-09-23T15:39:32Z")

</div>

Hi, I have made a case in the solver Conjugate Heat Transfer v2.0. I want to make a mesh with hex-dominant algorithm but I can’t change it: Is there any solution?

---

## [Sim Scale not using NS\_ Tags from Rhino User Text On Face](https://www.simscale.com/forum/t/sim-scale-not-using-ns-tags-from-rhino-user-text-on-face/100133)

<div class="topic-metadata">

**Author:** [@Matt\_FG](https://www.simscale.com/forum/u/Matt_FG)\
**Replies:** 5\
**Last updated:** [June 11, 2025, 3:04pm UTC](https://www.simscale.com/forum/t/sim-scale-not-using-ns-tags-from-rhino-user-text-on-face/100133 "2025-06-11T15:04:47Z")

</div>

Hi All, I am import a simple test model from Rhino and wanted to set all the faces of the Brep so they could used with Saved Selections, using the NS\_Taggig workflow. I can get this to work is i name the Object in Rhin…

---

## [Unexpected Upward Velocity Vectors in Drone Hover Simulation ](https://www.simscale.com/forum/t/unexpected-upward-velocity-vectors-in-drone-hover-simulation/100105)

<div class="topic-metadata">

**Author:** [@ceckert](https://www.simscale.com/forum/u/ceckert)\
**Replies:** 1\
**Last updated:** [May 28, 2025, 11:10am UTC](https://www.simscale.com/forum/t/unexpected-upward-velocity-vectors-in-drone-hover-simulation/100105 "2025-05-28T11:10:48Z")

</div>

Hi, https://www.simscale.com/workbench/?pid=3923271815672441018 I’m trying to simulate the velocity fields of multi-copter drones in a hover state, out of ground effect. I’ve followed all the relevant tutorials I co…

---

## [Mesh result problem](https://www.simscale.com/forum/t/mesh-result-problem/100061)

<div class="topic-metadata">

**Author:** [@Simone\_Giorgis](https://www.simscale.com/forum/u/Simone_Giorgis)\
**Replies:** 2\
**Last updated:** [May 14, 2025, 10:40am UTC](https://www.simscale.com/forum/t/mesh-result-problem/100061 "2025-05-14T10:40:10Z")

</div>

This is the end ot thelog of my mesh that i’m running End Mesh quality metrics: volumeRatio Acceptable range: 0 to 10 min: 1.0000000000000002 max: 45.3192800490935 average: 1.385938553919774 standard deviation 1.…

---

## [Velocity field started diverging](https://www.simscale.com/forum/t/velocity-field-started-diverging/100040)

<div class="topic-metadata">

**Author:** [@brajib](https://www.simscale.com/forum/u/brajib)\
**Replies:** 1\
**Last updated:** [May 5, 2025, 1:28pm UTC](https://www.simscale.com/forum/t/velocity-field-started-diverging/100040 "2025-05-05T13:28:47Z")

</div>

hello, can someone help, my project error with " Velocity field started diverging to a value of 1.02682e+07 m/s near the position: (8.839e-1, 4.463e-1, 7.123e-1). Please check the mesh quality near the reported location …

---

## [Cylinder operation to create rotational zone drone propeller](https://www.simscale.com/forum/t/cylinder-operation-to-create-rotational-zone-drone-propeller/100021)

<div class="topic-metadata">

**Author:** [@ceckert](https://www.simscale.com/forum/u/ceckert)\
**Replies:** 2\
**Last updated:** [May 1, 2025, 11:41am UTC](https://www.simscale.com/forum/t/cylinder-operation-to-create-rotational-zone-drone-propeller/100021 "2025-05-01T11:41:44Z")

</div>

Hi everyone, I’m new to SimScale and currently working on a project where I simulate the airflow generated by the propellers of a drone I use for aerosol sampling. My goal is to determine the height above the drone wher…

---

## [Conjugate heat transfer](https://www.simscale.com/forum/t/conjugate-heat-transfer/100020)

<div class="topic-metadata">

**Author:** [@brajib](https://www.simscale.com/forum/u/brajib)\
**Replies:** 4\
**Last updated:** [April 30, 2025, 5:51pm UTC](https://www.simscale.com/forum/t/conjugate-heat-transfer/100020 "2025-04-30T17:51:24Z")

</div>

hello, i’m a free user here. my project can’t running the simulation because ‘run out of memory’ i’ve been tried the solution Error: Machine Ran Out of Memory | SimScale Knowledge Base for this, but still cant running th…

---

## [Mesh is not visible](https://www.simscale.com/forum/t/mesh-is-not-visible/99915)

<div class="topic-metadata">

**Author:** [@Abd\_25](https://www.simscale.com/forum/u/Abd_25)\
**Replies:** 6\
**Last updated:** [April 2, 2025, 7:45pm UTC](https://www.simscale.com/forum/t/mesh-is-not-visible/99915 "2025-04-02T19:45:45Z")

</div>

Hello, I am just learning Simscale. I am making a mesh. It is completed. However, there is no image on the screen. I tried it on another computer, there is no problem.

[Next page](https://www.simscale.com/forum/c/using-simscale/cad/9.md?page=1)
