The simulation stopped as the solver memory requirements exceeded the machine memory.
What could be the possible reason?
The mesh size for the simulation is comparatively large and requires more memory than available on the selected number of cores.
What can I do now?
For the same mesh, increase the number of compute cores to increase the available memory for the solver. Recommended is at least 8 cores for intermediate mesh sizes (2-3 million cells) ,16 cores for large meshes (4-5 million cells) and 32 cores for very large meshes (6 million cells and onwards).
Optimize the mesh size or make it coarser so that less memory is required by the solver.
If none of the above suggestions did solve your problem, then please post the issue on our forum or contact us.
Last updated: March 16th, 2020
Did this article solve your issue?
How can we do better?
We appreciate and value your feedback.
Strictly Necessary Cookies
Strictly Necessary Cookie should be enabled at all times so that we can save your preferences for cookie settings.
If you disable this cookie, we will not be able to save your preferences. This means that every time you visit this website you will need to enable or disable cookies again.