Blog

AW banner

Optimizing a Micro Wind Turbine with CFD | American Wind

Written by: Netty on 14 June, 2017

Never before has a 1-kilowatt generator been squeezed into a device just 3 inches in diameter. That is until American...

Quantex disposable pumps

Increasing Manufacturing Tolerance for Disposable Pumps by 50% with FEA

Written by: Netty on 6 June, 2017

In medicine, disposable pumps are used for accurately dispensing medication, such as antibiotics, chemotherapy or pain...

vacuum chamber

Stress Analysis of a Vacuum Chamber: Meccanica’s FEA Story

Written by: Netty on 16 May, 2017

Robert Boz founded his company 8 years ago in Australia, with an initial focus on the optical industry. Now Meccanica is...

ARGEN - Fluence Analytics

Finite Element Analysis of Aggregation Rate Generator: ARGEN FEA Story

Written by: Netty on 18 April, 2017

  In March 2012, Advanced Polymer Monitoring Technologies, Inc. (APMT) was founded by Professor Wayne F. Reed, Bill...

EJ Consulting valve sizing

Valve Sizing with Simulation: EJ Consulting’s CFD Story

Written by: Netty on 10 April, 2017

The HUBZone program is a U.S. government program which recognizes companies that operate and employ personnel from areas...

radial fan

Radial Fan Design Optimization with CFD: Dr. Heiser’s Story

Written by: Netty on 22 March, 2017

Designers of fans and other turbomachinery need to perform both CFD and FEA simulations to test their products early in...

avionics

Avionics Equipment Simulation – A Thermal & FEA Story

Written by: Netty on 10 March, 2017

Founded in 1977, AVIONIK STRAUBING has been operating at the airport Straubing-Wallmuehle as a certified airplane maintenance...

cross flow fan simulation

Cross Flow Fan – Testing Vibration and Aerodynamics with CFD

Written by: Netty on 3 March, 2017

The cross flow fan (also called a tangential fan) is used extensively in the HVAC industry, as well as in electronics....

Loader