SimScale simulation projects by mjelemalaba | Page 1

mjelemalaba's profile

The goal is to simulate a crash test of an F1 front wing and analysis how the deformation loads change with time. In order to achieve this, a dynamic structural analysis will be used. The results will dictate whether additional changes regarding the following:

Material choice (What sort of composite)
Front wing design (Sharper or steeper nose)

The goal of the project is to optimize the design of an F1 Rear wing. An incompressible flow simulation will be used with a speed of 10m/s (36km/h) at the inlet and on the floor. 

F1 Rear wings are designed to create more negative lift on the car by deflecting the incoming air and creating flow separation. This serves to reduce the amount of drag experienced by the vehicle which allows to it move faster in a given distance than a vehicle that doesn't possess one. 

Feel free to correct me where I have done wrong and let's discuss this case together! Happy Simulating!

Thermomechanical Analysis of an exhaust pipe

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for a thermal analysis of a differential casing. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Frequency Analysis of a  F1 front wingFrequency Analysis of a  F1 front wing

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

A simple FEA analysis of a bicycle to test its behaviour when a static human load is applied.

The goal is to verify whether the model is fit to be used in a real-life industrial setting. The main frame needs to handle human wwight over a long period of time so different weight ranges will be tested. The model was generated in Solidworks.

The goal is to simulate a two foil F1 front wing using CFD. The model was made in CATIA v5.

Empty project containing the geometry of an engine piston for the thermomechanical tutorial of an engine piston

Tutorial project for linear static analysis of a crane

Tutorial showing the workflow for nonlinear FEA structural analysis, including varying load, hyperelastic material and elastic support.

A quick look into how the design of the an aeroplane affects its aerodynamics

Thermal Analysis of a Differential Casing

The goal of this analysis is to show the different stages of aerodynamic turbulence at different Mach numbers.

An aerodynamic analysis of the SKywalker x8 in which we calculate the drag coefficiency in order to enhance the fuselage design

Conjugate heat transfer simulation tutorial.

Analysis of Vision GT at low, medium and high speeds

This projects aims to showcase the function of a golf ball's dimples, compared to a same ball of smooth surface.

L'objectif est de simuler une voilure en plein vol qui subit des forces

This project aims to showcase how to set up a harmonic analysis for an airfoil geometry. It is a continuation of the Frequency Analysis of an Airfoil (1/2) tutorial.

Analysis of a Hyperloop at different velocities. This project will look at how its unique design allows it to travel under varying pressure conditions.

This tutorial contains a thermal comfort project, which analyses the duct positioning inside a theater, in order to have an effective ventilation system.

F1 Front Wing Geometry for Frontwing Tutorial

Tutorial project for setting up the Automated Hex-dominant for internal flow for an angled pipe geometry.

This project aims to showcase the different configuration options for the standard meshing tool, including basic and advanced settings. The various refinements are also covered.

Tutorial on incompressible flow simulation for aerodynamics studies, using SimScale Standard mesh algorighm.

This project aims to analyse the aerodynamics of a car at low, medium and high speeds.

IA crash test tutorial for a dynamic simulation of an FSAE Impact Attenuator.

Public Profile

mjelemalaba's profile