SimScale simulation projects by kaanarikanu | Page 1

kaanarikanu's profile

investigating the maximum stress distribution and corresponding strain measures by using SIMSCALE . after compression hinges will be able to stand as they supposed be

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Tutorial project for setting up the Automated Hex-dominant for internal flow for an angled pipe geometry.

Related to step-by-step tutorial of the biomedical workshop (session 2) https://www.simscale.com/forum/t/biomedical-engineering-workshop-session-2-analysis-of-cardiovascular-stent/36862

the bearing bracket of an airplane, static structural (training purposes)

Webinar Project- Carotid Artery Bifurcation
The project simulates the flow of blood as a non-newtonian fluid through a realistic Carotid Artery Bifurcation. Simulation are performed for 3 cases- of a healthy blood vessel  with no calcification or blockage and through an moderately and severely calcified or blocked blood vessel. 
The results show the differences in pressure, velocity profile and the outlet flow  through the 2 branches.

Flow conditions are based on a paper: STUDY OF BLOOD FLOW IN A BIFURCATION WITH A STENOSIS,
Sonia I.S. Pinto, E.D. Costa, J.B.L.M. Campos, J.M. Miranda

I'm trying to correlate with hand calculations.

In this project, we are focusing on material strength differences between amalgam and composite resin. Those are highly acceptable on their pros and cons side. Main challenges can be list as : Model is complex, Material is nonlinear.

Related to step-by-step tutorial of the biomedical workshop (session 1)

https://www.simscale.com/forum/t/biomedical-engineering-workshop-session-1-stress-shielding-in-a-hip-joint-prosthesis/36830/3

Public Profile

kaanarikanu's profile