SimScale simulation projects by janvanbaelen | Page 1

janvanbaelen's profile

Weight is one of the most critical parameters in aircraft design. In this challenge, you will be provided with a baseline design of an aluminum aircraft wing. Your objective is to reduce the weight of the wing without exceeding the maximum allowable deflection (+ y direction) of .90 meters.

In this project vibration analysis of jet engine is performed.

EuroAVIA-Workshop Session3 -Aerodynamics of an Aircraft. This project simulates air flow around an Aircraft at low sub-sonic compressible flow regime.

simulation of the forces on a new rescue hoist boom

test triangular shape as a hoist boom design

The project simulates 2 cases of aircraft wings to compare the aerodynamic effects.

test hollow cylindrical shape as a hoist boom design

test cylindrical shape as a hoist boom design

FSAE workshop session 1-Front Wing Analysis homework tutorial project.
For Step-By-Step see: https://www.simscale.com/forum/t/step-by-step-tutorial-homework-of-session-1/52675

helicopter adaptor for a new hoist boom design

Simulation of the stress on a new rescue hoist boom design

FSAE-Workshop Session-3 Homework project for aerodynamics of full car

FSAE-Workshop Session-2 Homework project for aerodynamics of complete Formula Student Race Car

simulation of the forces on a helicopter hoist boom

An aerodynamics study of the unique F-117 design in SimScale.

This project simulates air flow around an Aircraft at low sub-sonic compressible flow regime.

This project contains resources for Session 1 of the F1 Workshop

Public Profile

janvanbaelen's profile