SimScale simulation projects by Cephaias | Page 1

Cephaias's profile

you are to use Finite Element Simulation software to create 3-D mesh(s), define appropriate simulation, loading conditions and constraints, and specify relevant material properties. The plastic clip material can be either Acrylonitrile butadiene styrene (ABS) plastic or PVC (you will need to research & find material properties). Apply a suitable load force to allow a displacement greater than 5mm. Analyse using your own appropriate boundary conditions, to calculate the maximum allowable displacement before permanent deformation (plastic region), using both a linear solver & non -linear static

Tutorial project for a stress analysis of a connecting rod. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Temperature distribution and velocity profile

I want to understand the temperature distribution  within this model.  To effectively design for an efficient drying capacity for Cassava pellets. The  design utilizes charcoal as the heat source and is kept at temperature of 353K. And a blower velocity of 19.63m/s  for convective heat transfer.

Tutorial project for a flow analysis of a pipe junction. The project only provides the geometry to start with. See our tutorials section to have a look at the step-by-step instructions to set up the simulation.

Public Profile

Cephaias's profile